About Mitsui EPTTM (Ethylene-Propylene-Terpolymer) is an EPT(EPDM) brand that is produced by Mitsui Chemicals through its state of the art olefinic polymerization technology. With Mitsui Chemicals’ advanced technology, we constantly develop new grades which allow us meet customer demand. Mitsui…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade.&& Product Description Generic PA612 Material Status Commercial:…
About The Addisil 4X2 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is…
About SABIC® HDPE P6006 10000 is black compounded high density polyethylene with a bimodal distribution of molecular mass. Due to its profile of properties, this material is typically used for gas and drinking water pipe. Other typical applications include irrigation…
About CAPRAN® 2500 is a 1.0 mil (25 micron) biaxially oriented nylon 6 film with excellent flex crack resistance and superior clarity properties well suited for packaging applications requiring excellent mechanical strength.&& Product Description Supplier Honeywell Generic PA6 Material Status…
About Product Description 318CN is Linear Low Density Polyethylene natural resin designed for wire and cable applications. It contains low level of antioxidants and does not contain any slip and antiblock additives. Sufficient antioxidant and Cu-inhibitor should be added to…
About EnviroHDPE 8096 is a High Density Polyethylene product. It can be processed by injection molding and is available in North America.&& Product Description Generic HDPE Material Status Commercial: Active Features High density Availabilitys North America Process Methods Injection Molding…
About EVA resin ALCUDIA® PA-430 is recommended for injection moulding as well as for blends with other products like waxes and mineral fillers. It contains antioxidant and free flowing agent. TYPICAL APPLICATIONS Injection moulding. Release agents containing silicone must be…
About LOCTITE® EA E-60NC is a flowable, industrial grade epoxy potting compound with extended work life. Once mixed, the two-part epoxy cures at room temperature to form a rigid, black encapsulant that is non-corrosive to metallic components on PC Boards…
About Product Description Supplier BASF Generic TPU-醚 Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…