About QAMAR FD21HS is a Linear Low Density Polyethylene material. It is available in North America for blown film or cast film. Important attributes of QAMAR FD21HS are: Antiblock Clarity Slip Typical application of QAMAR FD21HS: Film&& Product Description Generic…
About Modified PPE Unreinforced Flame retardant V-0 Heat resistance High&& Product Description Supplier Asahi Kasei Generic PPO(PPE)+PS Material Status Commercial: Active Features Flame Characteristics,High Heat Resistance,V-0 Availabilitys Africa & Middle East ,North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data…
About Mylar Type A films have balanced tensile properties and excellent resistance to moisture and most chemicals. They can withstand temperature extremes from -94 to 302°F. Mylar does not become brittle with age under normal conditions, because it contains no…
About POM copolymer Stiff-flowing type for injection molding and extrusion with high impact toughness and good tracking resistance over a high range of temperature; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high…
About E8575-A1 is a crosslinkable, strippable semi-conductive compound, designed for XLPE insulated cables and use in both dry and steam curing processes. E8575-A1 is recommended for Italian, French and Spanish standards on XLPE. Specifications E8575-A1 meets the requirements as below,…
About Overcomes heat resistance & shrinkage of PLA & PBS Physical properties applicable to heat resistant, injection and IT products Applicable to sheets, air permeable film blow containers, etc.&& Product Description Generic PLA Material Status Commercial: Active Features Biodegradable,V-0 Availabilitys…
About Bio-derived, non-phthalate plasticizer; USDA BioPreferred® certified 94% biobased.&& Product Description Supplier Polyone Generic 非邻苯二甲酸(增塑剂) Material Status Commercial: Active Features Renewable resources,No DEHP plasticizer,Rapid solidification poin,Fast Fusion,High Solvating Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density…
About Product Description Supplier Chang Chun Generic PBAT Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Density 1.22 g/cm³ ISO 1183 Moisture 0.1 % ISO 62 Melt Flow Rate 190℃，2.16kg 20±3 g/10min ISO 1133 MECHANICAL Nominal…
About Tenite™ cellulosic plastics are noted for their excellent balance of properties – toughness, hardness, strength, surface gloss, clarity and warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface,…
About GPPS351 retains high mechanical strength & high heat resistance, and its products have excellent transparency and gloss.&& Product Description Supplier SECCO Generic PS (GPPS) Material Status Commercial: Active Features Good Rigidity,Good Clarity,Good surface appearance,High Heat Resistance,HB Availabilitys Asia Pacific…