About EPO-TEK® CF6-2 is a two component, high temperature and high Tg epoxy designed for fiber optic packaging.&& Product Description Generic 环氧树脂 Material Status Commercial: Active Features Low Viscosity,High pressure disinfection,High Heat Resistance,Low odor,Radiation disinfection,Ethylene oxide disinfection Availabilitys Africa &…
About FORTRON® MT9140L4 SF3001 (natural) is a 40% glass fiber reinforced injection molding grade that exhibits excellent heat and chemical resistance, inherent flame retardancy, and high hardness and rigidity at elevated temperatures. FORTRON® MT9140L4 SF3001 (natural) is a special grade…
About Product Description Supplier BASF Generic 光稳定剂 Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade.&& Product Description Generic PA610 Material Status Commercial:…
About Durethan® BKV15 000000 DUS008 (Dry) PA 6, 15 % glass fibers, injection molding&&Durethan® BKV15 000000 DUS008 PA 6, 15 % glass fibers, injection molding&&Durethan® BKV15 000000 DUS008 PA 6, 15 % glass fibers, injection molding&& Product…
About JPPPO20. 30% Glass reinforced. FDA compliance (restrictions apply). Low water absorption. Hydrolitic stability. Dimensional stability. Suitable for fluid engineering applications including pump housings and impellers, valve components and others.&& Product Description Generic PPO(PPE)+PS Material Status Commercial: Active Features Good…
About PVC for paste making ® Vinnolit E 67 FF is a fine particle size, low- medium molecular weight emulsion type PVC homopolymer with a medium emulsifier content. It produces plastisols exhibiting medium viscosity at low and high shear rates…
About Shin-Etsu KE-1950-40 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-1950-40 is low enough to allow easy pumping through…
About Extrusion grade. Excellent impact strength. 185F (85C) DTUL. UL94 V-1 rated.&& Product Description Supplier SABIC Generic PPO(PPE)+PS Material Status Commercial: Active Features High impact resistance Availabilitys North America Process Methods Extrusion Technical Data PHYSICAL Nominal value Unit Test method…
About TPUCO® TPUE-UE80 is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) material. It is available in Asia Pacific for extrusion. Primary attribute of TPUCO® TPUE-UE80: Wear Resistant. Typical applications include: Hose/Tubing Conveyors Film Sheet Wire & Cable&& Product Description Supplier PU…