About Yuyao PPO SE1X701 is a Polyphenylene Ether + PS (PPE+PS) product. It can be processed by injection molding and is available in Asia Pacific. Typical application: Electrical/Electronic Applications. Characteristics include: Flame Rated Chemical Resistant Flame Retardant Good Dimensional Stability…
About Injection Molding&& Product Description Supplier DSM Generic TPC-ET Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.20 g/cm³ ISO 1183 Melt…
About M3804RW/RWP is a linear-low density polyethylene with a balance of impact properties, stiffness, and processability. M3804RW/RWP is suitable for rotational molding of storage tanks and general applications. It contains high level of UV stabilizer to give protection for outdoor…
About Vydyne ECO315 BK06 is a non-halogenated, unfilled, flame-retardant PA66/6 copolymer with excellent toughness and ductility. It is lubricated for machine feed and easy mold release and has an Underwriters Laboratories UL 94 flammability classification of V-0 at 0.4 mm…
About Silopren LSR 3485/38 is a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which…
About The Addisil 4X2 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is…
About Sheet extrusion grade. Highly compatible with GPPS (general-purpose polystyrene), for sheets with superior balance of transparency and impact resistance. Superior processability, enabling production of deep-draw containers and other products. It is supplied in pellet form. In blends with GPPS,…
About Globalene® 6524 is a Polypropylene Homopolymer (PP Homopolymer) material. It is available in Asia Pacific or North America for injection molding. Important attributes of Globalene® 6524 are: Chemical Resistant Heat Resistant Homopolymer Typical applications include: Appliances Automotive&& Product Description…
About Product Description Supplier SH shenma Generic PA6 Material Status Commercial: Active Features Glass fiber reinforced toughening Technical Data PHYSICAL Nominal value Unit Test method Density 1.33 g/cm³ ISO 1183 Shrinkage rate 0.2-0.7 % ISO 294/4 MECHANICAL Nominal value Unit…
About Hostaform® M25AE is a special grade of acetal copolymer targeted for extrusion shapes (rod, bar, plate, etc.) free of center porosity in large diameters and thicknesses. Chemical abbreviation according to ISO 1043-1: POM&& Product Description Supplier Celanese Generic Copolymer…