About VIBRATHANE 8050 is a TDI-terminated polyester- based prepolymer which yields a 50 Shore D hardness urethane when cured with 4,4′-methylene-bis (orthochloroaniline), commonly called MOCA. VIBRATHANE 8050 elastomers are characterized by: High tensile and tear properties Low compression set Excellent…
About 3M™ Dyneon™ Fluoroelastomer FC 2124 is a dipolymer made from hexafluoropropylene and vinylidene fluoride. FC 2124 has an incorporated bisphenol cure system Special Features Composition: dipolymer of vinylidene fluoride and hexafluoropropylene Proprietary incorporated cure technology Excellent hot tear properties…
About Absolac® 150 is a high rigidity grade FEATURES High Rigidity APPLICATIONS Camera Parts Musical Instruments Battery Cases Vacuumiser Housing&& Product Description Supplier INEOS Generic ABS Material Status Commercial: Active Features Good Rigidity Availabilitys Asia Pacific Technical Data PHYSICAL Nominal…
About Hoffman PVC 117-110 is a Rigid Polyvinyl Chloride material. It is available in North America. Important attributes of Hoffman PVC 117-110 are: Flame Rated Rigid Typical application of Hoffman PVC 117-110: Plumbing/Piping/Potable Water&& Product Description Generic PVC，刚硬 Material Status…
About 中耐热级，高冲击 Product Description Supplier CHI MEI Generic ABS Material Status Commercial: Active Features Heat Resistance, Good Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Melt Volume Rate 200℃，5 kg – cm³/10min ISO 1133 220℃，10 kg 7.5…
About DAPCO™ 3003 is a two-component, high strength, structural epoxy adhesive which cures at normal room temperature. Features & Benefits: Thixotropic flow properties permit use on vertical or overhead areas Bonds a variety of substrates, including metal, wood, concrete and…
About Description: PCP based compounds for sheaths in elastic power cables Specifications: BS 6899 Type RS2 Packaging: In carton boxes of approximately 400-1000 kg Types of cables where it can be used: EPR/PCP TYPE B2, EPR/PCP TYPE C2.&& Product Description…
About SABIC® PPcompound 8503 is a development grade, modified mineral filled Polypropylene for automotive exterior applications. This material has been designed to combine excellent paint adhesions, high modulus and high impact. SABIC® PPcompound 8503 is a designated automotive grade.&& Product…
About Lion Idemitsu Composites PPS Y531F1 is a Polyphenylene Sulfide (PPS) product filled with 30% mineral. It is available in Asia Pacific. Characteristics include: Flame Rated Good Aesthetics Good Processability Lubricated&& Product Description Supplier Lion Idemitsu Generic PPS Material Status…
About Sylvin 9077-65 Natural Is A Vinyl Compound Formulated For Injection Molding Applications. This Compound Has A Underwriters Laboratories Listing As A Recognized Component.&& Product Description Supplier Sylvin Generic PVC, not specified Material Status Commercial: Active Features Soft,Agglomerability,HB Availabilitys Africa…