About One component PU Resins PU membrane is produced by coating the resin on substrate and drying it to vaporize the solvent adequately. The membrane gives soft hand-feel and dry surface, and offers waterproof and windproof properties. Using one component…
About Loyblend® TA-1101FR is a flame retardant PC/ABS alloy compound. This grade offers high impact resistance, high rigidity, good processability and good thermal stability.&& Product Description Generic PC+ABS Material Status Commercial: Active Features Good Rigidity,High impact resistance,Good Printability,Flame Characteristics,Heat Stabilized,V-0…
About Designed for processing into yarn and bonding fibers Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. Consult the regulations for complete details. ASPUN™ 6835A Fiber Grade Resin is a linear low density polyethylene (LLDPE). A typical process is…
About NOVAPOL® HB-W646-UH is a High Density Polyethylene material. It is available in North America for blow molding. Important attributes of NOVAPOL® HB-W646-UH are: Chemical Resistant Good Processability Hexene Comonomer High ESCR (Stress Crack Resistant) Impact Resistant Typical applications include:…
About ebalta GH 760/GL is a two-components epoxy resin, curing at room temperature, castable to 40 mm. The fine non-grinding fillers lead to good surface slip properties and mechanical workability. For this reason ebalta GH 760/GL is especially suitable for…
About RX® 630 is a fiberglass reinforced phenolic molding compound, with good dimensional stability and good strength at elevated temperatures.&& Product Description Supplier SBHPP Generic 酚醛树脂 Material Status Commercial: Active Features Good Rigidity,Good Dimensional Stability,V-0 Availabilitys North America Technical Data…
About HiFill® PPSU 4000 NAT is a Polyphenylsulfone (PPSU) product. It can be processed by injection molding and is available in North America. Primary characteristic: flame rated.&& Product Description Generic PPSU Material Status Commercial: Active Availabilitys North America Process Methods…
About Hoffman PVC V7-31 is a Rigid Polyvinyl Chloride material. It is available in North America for injection molding. Important attributes of Hoffman PVC V7-31 are: Flame Rated Rigid Typical application of Hoffman PVC V7-31: Plumbing/Piping/Potable Water&& Product Description Generic…
About 15% Deflection for optimum life Hardness 95 Shore A Best tear strength and cut resistance High loadbearing capacity Definition with less penetration Generally used for forming heavier and tougher metals.&& Product Description Generic PUR Material Status Commercial: Active Features…
About Durethan® BTC65H3.0EF 901510 (Dry) PA 6, 65% mineral, injection molding, heat-aging stabilized, improved heat conductivity&&Durethan® BTC65H3.0EF 901510 PA 6, 65% mineral, injection molding, heat-aging stabilized, improved heat conductivity&&Durethan® BTC65H3.0EF 901510 PA 6, 65% mineral, injection molding,…