About Very high impact ABS. Toughness FDA compliant.&& Product Description Supplier SABIC Generic ABS Material Status Commercial: Active Features Good flexibility,High impact resistance,Food contact compliance,HB Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data MECHANICAL Nominal value Unit Test…
About Product Description Supplier TOSOH Generic PPS Material Status Commercial: Negative Technical Data THERMAL Nominal value Unit Test method Hot deformation temperature 0.45 MPa >260 ℃ ISO 75 1.8 MPa >260 ℃ ISO 75 TD 3.1 ISO 11359 MD 2.2…
About 50% Glass Reinforced&& Product Description Supplier DSM Generic PA 46 Material Status Commercial: Active Availabilitys Asia Pacific Technical Data Process Conditions injection Nominal value Unit Test method Drying temperature 80 °C Drying time 4.0 to 8.0 hr Barrel rear…
About Sylvin 8200-70 Brown 7412 Is A Vinyl Compound Formulated For General Purpose Extrusion Or Molding Applications.&& Product Description Supplier Sylvin Generic PVC, not specified Material Status Commercial: Active Availabilitys North America Process Methods Extrusion Technical Data PHYSICAL Nominal value…
About Standard expanded Polystyrene SABIC® EPS763 is manufactured by the suspension polymerization of styrene monomer. The polymerization is generally carried out in a batch process. SABIC® EPS763 is an expandable polystyrene grade supplied in free-flowing beads, containing pentane (CFC free)…
About Adflex KS311P is a reactor TPO (thermoplastic polyolefin) manufactured using LyondellBasell’s proprietary Catalloy process technology. It is suitable for extrusion as well as injection molding and blow molding applications, including mechanical and decorative automotive parts requiring elastomeric type properties,…
About Daplen MD250SY is a 20% mineral filled polypropylene compound intended for injection moulding. It contains 50% post-consumer recycled polymer. Applications Daplen MD250SY is intended for: Automotive exterior applications Automotive under the bonnet parts Other automotive parts&& Product Description Supplier…
About Product Description Supplier SKC Generic PCT Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About High Stiffness, Low Density&& Product Description Supplier LOTTE Generic PP homopolymerization Material Status Commercial: Active Features Good Rigidity,Block Copolymer,Low density Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.930 g/cm³ ASTM D792 Melt Flow…
About OLEFISTA™ QM4301D/QMC292 is a Specialty Elastomer material. It is available in Asia Pacific. Important attributes of OLEFISTA™ QM4301D/QMC292 are: Flame Rated Flame Retardant Heat Resistant&& Product Description Supplier Mitsubishi Generic 特殊弹性体 Material Status Commercial: Active Features Flame Characteristics,High Heat…