About NYLOY® M-0030N-V N4 is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific or North America for injection molding. Important attributes of NYLOY® M-0030N-V N4 are: Flame Rated Flame Retardant Halogen Free&& Product Description Supplier Nytex…
About POCAN® DP1105 000000 PBT, non-reinforced, injection molding, improved flowability&&POCAN® DP1105 000000 PBT, non-reinforced, injection molding, improved flowability&&POCAN® DP1105 000000 PBT, non-reinforced, injection molding, improved flowability&& Product Description Supplier LANXESS Generic polybutylene terephthalate Material Status Commercial: Active…
About CABELEC CA3178 electrically conductive compound is made from conductive carbon black dispersed in polyamide 6. Its electrical and mechanical properties are not impacted by normal atmospheric conditions. It has been developed for injection moulding applications. Applications CABELEC CA3178 conductive…
About Skyrol ® SH64 is an optically clear film that has been pretreated on both sides. One side is pretreated for excellent performance in most print processes, and the other side is treated with an antistatic coating for write-on, wipe-off…
About RTP 1000 is a Polybutylene Terephthalate (PBT) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of RTP 1000: Flame Rated.&& Product Description Generic polybutylene terephthalate…
About ALTECH® PC ECO 1000/141 is a Polycarbonate (PC) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of ALTECH® PC ECO 1000/141 include electrical/electronic applications, engineering/industrial parts, housings and…
About Lucky Enpla LPC1001F 9306 is a Polycarbonate (PC) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.&& Product Description Supplier Lucky Enpla Generic Polycarbonate Material Status Commercial: Active Features V-0 Availabilitys North America,Asia…
About SUMIPEX general-purpose grades can be classified into two basic categories; good flow and heat resistant types. Each grade is available in pellet form. Bead form is available for some grades&& Product Description Supplier Sumitomo Generic PMMA Material Status Commercial:…
About The Addisil 4X2 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is…
About Product Description Supplier Kolon Generic polybutylene terephthalate Material Status Commercial: Active Features Weather resistance is good Availabilitys North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.52 g/cm³ ASTM D792 Shrinkage rate 0.4~1.1 % ASTM…