About THORNEL® P25 is a continuous pitch-based carbon fiber. THORNEL P25 is offered both with and without sizing. THORNEL P25 is offered in both twisted and never-twisted forms.&& Product Description Supplier Cytec Industries Generic 沥青基碳纤维 Material Status Commercial: Active Availabilitys…
About High-viscosity, unreinforced polyether ether ketone VESTAKEEP 4000G is a high-viscosity, unreinforced polyether ether ketone for injection molding and extrusion. The semi-crystalline polymer features superior thermal and chemical resistance. Parts made from VESTAKEEP 4000G are self-extinguishing. VESTAKEEP 4000G can be…
About Product Description Generic PA6 Material Status Commercial: Active Features Good Rigidity,High impact resistance,High Viscosity,Lubricating,Heat Stabilized Availabilitys Africa & Middle East ,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 23℃ 1.10 g/cm³ ISO 1183 water content 0.1 %…
About Hyflon® AD 40L is an amorphous perfluoro-polymer available in powder form. Hyflon® AD polymers resemble semicrystalline perfluoropolymers in their performance properties as they exhibit high temperature stability, excellent hydrophobicity and chemical resistance as well as very low surface energy.…
About BMC 605LWR is a mineral filled, glass fiber reinforced polyester bulk molding compound suitable for compression, transfer and stuffer injection molding. It is designed to provide improved wear resistance compared to standard BMC605. BMC 605LWR is produced in extruded…
About 3M™ Dyneon™ TFM™ Modified PTFE Compound TFM 6221 is a free-flowing compound based on modified suspension PTFE of the 2nd generation containing conductive, FDA*-approved fillers for compression and automatic moulding. Special Features Increased thermal dimensional stability Increased surface hardness…
About SUMIKATHENE® F213-P is a Low Density Polyethylene material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application of SUMIKATHENE® F213-P: Film&& Product Description Supplier Sumitomo Generic LDPE Material Status Commercial:…
About Globalene® 7433-9 is a Polypropylene Impact Copolymer (PP Impact Copolymer) material. It is available in Asia Pacific or North America for injection molding. Important attributes of Globalene® 7433-9 are: Copolymer Good Processability Heat Resistant Impact Resistant Typical applications include:…
About Sindustris PP SH5301 is a Polypropylene material. It is available in Asia Pacific for injection molding. Typical application of Sindustris PP SH5301: Engineering/Industrial Parts&& Product Description Generic PP not specified Material Status Commercial: Active Availabilitys Asia Pacific Process Methods…
About Alcryn® 2245 TR is a Melt Processable Rubber (MPR) product. It can be processed by blow molding, compression molding, extrusion, or injection molding and is available in Asia Pacific, Europe, or North America. Applications of Alcryn® 2245 TR include…