About Product Description Supplier EMS-GRIVORY Generic PA66/6 Material Status Commercial: Active Availabilitys Asia Pacific,Europe Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer…
About Characteristics Polyvinyl butyral (PVB) grades with different molecular weights, and varying degrees of acetalization. Recommended Uses Binder for coatings (adhesion promotion/corrosion protection primers, shop primers, wash primers, stoving enamels, varnishes and lacquers for different substrates). Binder for printing inks.…
About XYRON™ S201A is a Polyphenylene Ether (PPE) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, or North America.&& Product Description Supplier Asahi Kasei Generic PPO(PPE) Material Status Commercial:…
About Durethan® BKV40H3.0 000000 (Dry) PA 6, 40 % glass fibers, injection molding, heat-aging stabilized&&Durethan® BKV40H3.0 000000 PA 6, 40 % glass fibers, injection molding, heat-aging stabilized&&Durethan® BKV40H3.0 000000 PA 6, 40 % glass fibers, injection molding,…
About DuPont™ Teflon® FFR 550 is fluoropolymer compounded with a nucleating package. The nucleating package in this resin, when combined with nitrogen gas injection, forms uniform foam cells in the insulation.&& Product Description Supplier Chemours Generic 含氟聚合物 Material Status Commercial:…
About TRILOY® MH275M is a Polycarbonate + ABS (PC+ABS) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.&& Product Description Supplier Samyang Generic PC+ABS Material Status Commercial: Active Features HB Availabilitys North America,Asia Pacific,Europe…
About Ecomax 2000 is a Thermoplastic Elastomer designed and manufatured for sports infill applications.&& Product Description Generic TPE Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density…
About SABIC® LLDPE 726QJ is a butene linear low density polyethylene resin. This grade is typically designed to give blown films a relatively high stiffness for good machinability and a good overall balance of other performance properties, such as puncture…
About TAFMER™ A-4070S TAFMER™ A-4070S is a Polyalphaolefin (PAO) material. It is available in North America. Primary attribute of TAFMER™ A-4070S: Good Flexibility.&&TAFMER™ A-4070S TAFMER™ A-4070S, ethylene based polymer, is a specialty olefinic resin designed to improve impact…
About Technology characteristics: 30% Glass fiber reinforced, heat-resistant&& Product Description Supplier Shunde Hones Generic polybutylene terephthalate Material Status Commercial: Active Features Heat Resistance, Good,V-0 Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.65 g/cm³ ASTM D792…