About Product Description Supplier LG Chemical Generic SAN Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the…
About Polybutene-1 grade PB 8640M is a random copolymer of butene-1 with low ethylene content. In blends with PE polymers, it forms a separate, but well-dispersed phase. Its primary use is as a minority blend component in the seal layer…
About Polypropylene PPH 9059 is homopolymer with a Melt Flow Index of 25 g/10 min. Polypropylene PPH 9059 is intended for extrusion of bulk continuous filament (BCF) and continuous filament (CF) fibres. Polypropylene PPH 9059 has a special anti gas-fading…
About Polyether block amide Pebax® 2533 SD 02 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SD grade is heat and UV stabilized and contains mould release additive.&& Product Description Supplier Arkema Generic PA12弹性体 Material…
About Viton® A-401C fluoroelastomer is an incorporated cure “A-family” dipolymer designed for compression molding of sealing devices that must meet specific fluoroelastomer specifications. In addition to the heat and chemical resistance characteristics typical of Viton® fluoroelastomers, Viton® A-401C offers significant…
About Grilon® BM 16 nat is a Polyamide material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for blown film or cast film. Primary attribute of Grilon® BM 16 nat: High Viscosity.…
About UNIGARD™ RE DFDA-1638 Natural is a non-halogen, flame retardant, thermoplastic, low smoke, low corrosive, and low toxic compound. It has been designed for general purpose, medium and low voltage applications. If needed, standard color concentrates (EVA or PE based)…
About Product Description Supplier DIC Corporation Generic PPS Material Status Commercial: Active Features High impact resistance,Low odor,low-temperature impact resistance Availabilitys North America,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.67 g/cm³ ISO 1183 Water absorption rate 23℃，24hr…
About HIVAL® 521054 is a High Density Polyethylene material. It is available in North America for injection molding. Important attributes of HIVAL® 521054 are: RoHS Compliant BPA Free Food Contact Acceptable Typical applications include: Consumer Goods Food Contact Applications Household…
About A low hardness, multi-purpose thermoplastic rubber featuring easy processability with good compression set and high temperature performance. Globalene TPV 4035A NT can be processed by extrusion or molding for applications such as weatherstrip profile, seals, window gaskets and other…