About The AD1/CS Series is your material solution for applications with excellent adhesion to polar thermoplastics such as ABS, PC and PC/ABS as well as excellent compression set. The compounds are available in natural and black colors. Typical applications Fastenings…
About ACRYLITE® Satinice df light diffusing acrylic polymers meet the demanding requirements for the injection molding or extrusion of lighting products in residential, industrial, office and automotive interior applications. These light diffusing acrylic polymers are available in four ACRYLITE® grades…
About Lion Idemitsu Composites PPS G142Z1 is a Polyphenylene Sulfide (PPS) product filled with 70% glassmineral. It is available in Asia Pacific. Characteristics include: Conductive Insulating&& Product Description Supplier Lion Idemitsu Generic PPS Material Status Commercial: Active Features Thermal conductivity,Insulation…
About SUMIKASUPER LCP is a thermotropic liquid crystalline polyester, showing the highest heat resistance among engineering plastics. SUMIKASUPER LCP E6810 is 50% reinforced with a combination of glass fiber and inorganic filler.&& Product Description Supplier Sumitomo Generic 液态聚合物 Material Status…
About Polyether block Pebax® Rnew® 35R53 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV resistant. The percentage of renewable…
About Product Description Generic Linear low density polyethylene Material Status Commercial: Active Features High impact resistance,Good liquidity Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 20 g/10min Density 0.926 g/cm³ MECHANICAL Nominal value Unit…
About High elasticity with good elastic recovery Excellent impact strength in blends with polypropylene and polyethylene High melt strength Soft touch blend DFDB-1088 NT Very Low Density Polyethylene (VLDPE) Resin is produced via gas phase polymerization from Dow. This is…
About Algoflon® D 1610 F is a white aqueous PTFE dispersion and is produced without any intentional use or addition of PFOA. It is designed for additivation of plastics and is particularly recommended for use as anti-drip in flame retardant…
About Sylvin 9448-75 Yellow 4179 Is A Vinyl/Polyurethane Compound Formulated For Molding Applications That Require Less Plasticizer Migration.&& Product Description Supplier Sylvin Generic PVC+PUR Material Status Commercial: Active Features Low to no mobility,Plasticizing Availabilitys North America Process Methods Injection Molding…
About Product Description Supplier Kolon Generic TPC-ET Material Status Commercial: Active Availabilitys North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.15 g/cm³ ISO 1183 Melt Flow Rate 230℃，5.0kg 4 g/10min ISO 1133 Water absorption rate…