About HydroMed D is a series of ether-based hydrophilic urethanes with excellent adhesive and cohesive properties while exhibiting tailored water absorption levels depending upon end product targets. This material does not require UV curing and as such, provides a superior…
About Data was measured on natural colored test specimens.&& Product Description Generic Polycarbonate Material Status Commercial: Active Features Flame Characteristics,V-2,V-0 Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.21 g/cm³ ASTM D792 Melt Flow Rate 12…
About EUROPLEX® Film HC 99716 EUROPLEX® Film HC 99716 is a weather resistant and transparent co-extruded PMMA and PVDF film. It is designed to bring a state of the art UV protection and surface finish for thermoset materials such…
About Blow Molding Grade&& Product Description Supplier DSM Generic TPC-ET Material Status Commercial: Active Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.15 g/cm³ ISO 1183 Melt Volume Rate 230℃，10 kg 8.00 cm³/10min ISO 1133…
About TECHNYL® B 218 V30 Black 21N is a polyamide 66/6, reinforced with 30% of glass fibre, heat stabilized, for injection moulding. This grade offers an excellent combination between impact resistance, rigidity, thermal resistance and surface appearance. This grade is…
About SABIC® HDPE ICP4907S is part of SABIC’s high density polyethylene Industrial Container Product portfolio. SABIC® HDPE ICP4907S is typically used for state of the art blow moulding UN certified Intermediate Bulk Containers and Heating Oil Tanks, up to 1000…
About AKROLEN® PP GFM 25/15 black (1415) is a 25% glass fibre reinforced, 15% mineral-filled polypropylene with good surface and dimensional stability Thin wall housings for electronic parts in the automotive industry with operation temperatures up to 100°C&& Product Description…
About Shin-Etsu KEG-2000-30 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KEG-2000-30 is low enough to allow easy pumping through…
About SABIC® HDPE B5429 is a medium molecular weight high density polyethylene copolymer. It is typically used for blow moulding bottles of small sizes. SABIC® HDPE B5429 offers a very good combination of toughness, stress cracking resistance (ESCR), load bearing…
About AKROMID® B3 GF 30 1 L black (4491) is a 30% glass fibre reinforced and heat stabilised polyamide-blend with a reduced density compared to standard PA6 GF 30 Technical components in the automotive and electronic industry, where a weight…