About Product Description Generic 抗静电剂 Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About Durethan® BKV 30 FN00 000000 (干燥 ) PA 6, 30 % glass fibers, injection molding, halogen free flame retardant&&Durethan® BKV 30 FN00 000000 PA 6, 30 % glass fibers, injection molding, halogen free flame retardant&& Product Description…
About Description General Purpose, High Modulus Application Injection Parts for Automotives, Leisure & Sports, etc.&& Product Description Supplier LG Chemical Generic TPC-ET Material Status Commercial: Active Features HB Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL…
About High Flow Grade CHARACTERISTICS: High flow, High impact.&& Product Description Generic ABS Material Status Commercial: Active Features HB Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.04 g/cm³ ASTM D792…
About Luran® HD 20 is an easy-flow grade of SAN especially designed for the medical market. It is suitable for moldings with very thin walls and / or adverse flow length to wall ratio. It features very good transparency and…
About AFFINITY* PL 1850G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed to provide blown and cast film products with low temperature sealability, excellent optics and good abuse resistance. It has value as a sealant layer in…
About Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties. Outstanding tensile strength and high elongation at break, good damping characteristics, a high resilience performance and very good wear resistance. Typical applications Spiral tubing, pneumatic tubing, round belting, technical mouldings e.g.…
About LNP LUBRILOY LEXAN_WR6300 compound is a wear resistant PC+SAN, with proprietary lubricant, for business equipment applications.&& Product Description Supplier SABIC Generic AES+PC+AS(SAN) Material Status Commercial: Active Features Lubricating,HB Availabilitys North America Process Methods Injection Molding Technical Data PHYSICAL Nominal…
About Asahi Kasei Tuftec™ H1041 is good for easy peel film application. It can be also used as a modifier for a variety of plastics with its superior balance of mechanical property and melt flowability. Olefinic and styrenic resins modifier,…
About Radel® R-5600 is a very high melt flow grade of Radel® polyphenylsulfone (PPSU). It is especially well-suited for parts requiring long flow length with thin walls. Radel® resins offer exceptional hydrolytic stability and toughness superior to other commercially-available, high-temperature…