About Heat Stabilized, Wear and Friction Modified&& Product Description Supplier DSM Generic PA 46 Material Status Commercial: Active Features Heat Stabilized Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.18…
About TECHNYL eXten® D 219CR V33 Natural is a grade based on polyamide blend of polyamide 6.10 and polyamide 66, reinforced with 33% of glass fiber, heat stabilized with organic stabilizers, for injection moulding.&& Product Description Supplier DOMO Generic PA…
About Product Description Generic PP not specified Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About ARCEL® LD (1.5 pcf) is a Polystyrene + PE (PS+PE) material. It is available in North America for foam processing.&& Product Description Generic PS+PE Material Status Commercial: Active Availabilitys North America Process Methods Foam treatment Technical Data PHYSICAL Nominal…
About Celanex 733LD is a 30% glass-filled PBT alloy that exhibits low warp characteristics. Celanex 733LD is well suited for electrical connectors.&& Product Description Supplier Celanese Generic polybutylene terephthalate Material Status Commercial: Active Features Low warping,HB Availabilitys North America Technical…
About EVAL™ C109B is an Ethylene Vinyl Alcohol (EVOH) product. It is available in Europe.&& Product Description Generic EVOH Material Status Commercial: Active Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.17 g/cm³ ISO 1183 Melt Flow…
About LONGLITE® PBT 2000是难燃级PBT Product Description Supplier Chang Chun Generic polybutylene terephthalate Material Status Commercial: Active Features High liquidity,V-0 Technical Data MECHANICAL Nominal value Unit Test method tensile strength 49-68.6 MPa ASTM D638 Tensile strain 68.6-98.1 % ASTM D638 bending…
About DURACON® TW-31 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated Rigid Warp…
About General Purpose Grade CHARACTERISTICS: High gloss, High rigid&& Product Description Generic ABS Material Status Commercial: Active Features HB Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density — 1.05 g/cm³ ASTM…
About Ultramid T KR 4355 G5 is a 25% glass fiber reinforced injection molding PA6/6T grade featuring high toughness, stiffness, and strength, low water absorption, and high melting point (295 C). After the material has been conditioned, its mechanical properties…