About Impet 330R is a 30% glass reinforced injection moldable polyester containing post consumer recycled PET. It provides an excellent combination of strength, stiffness, and high temperature resistance.&& Product Description Supplier Celanese Generic PET Material Status Commercial: Active Features Good…
About Enable 2010PA is a metallocene ethylene-hexene copolymer. Enable mPE resins offer an outstanding balance between processing and film properties, including tensile, impact and puncture. Enable 2010PA is TNPP-free. Product Description Supplier ExxonMobil Generic mPE Material Status Commercial: Active Availabilitys…
About 30% Glass Reinforced, Flame Retardant, Polybutylene Terephthalate&& Product Description Supplier DuPont Generic polybutylene terephthalate Material Status Commercial: Active Features Flame Characteristics,V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data MECHANICAL Nominal value…
About 改性聚丙烯，高刚度和良好的冲击强度，高耐热性，低收缩和低翘曲 Product Description Supplier Kingfa Generic PP not specified Material Status Commercial: Active Features Low warping,Low contractility,High Heat Resistance Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 230℃，2.16Kg 4 g/10min ISO 1133 Density…
About Product Description Supplier ZYPEEK Generic PEEK Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density crystallization 1.3 g/cm³ ISO 1183 Amorphous 1.26 g/cm³ ISO 1183 Water absorption rate 0.07 % ISO 62-1 0.4 % ISO…
About AMPLIFY™ TY 1353 Functional Polymer is a maleic anhydride grafted (MAH) polymer. In tie layers for flexible packaging, AMPLIFY TY 1353 Functional Polymer promotes adhesion of Polyethylene to barrier polymers such as polyamide and ethylene vinyl alcohol (EVOH) and…
About GOST / TU: GOST 16337-77 LDPE is produced by means of polymerization of ethyiene under high pressure in tubular or stirred reactorwith the use of radical type initiator. LDPE is used for manufacturing of pipes, fittings, articles contacting with…
About 15%玻纤增强，高强度及高抗热变形，电气性能佳。 适用于汽车、电子、电器等产业精密 注塑用，如日光灯基座、省电灯泡用 灯座、汽车用之分电盘、汽车把手、 灯座、风扇外壳、电器零件开关等。 Product Description Supplier Nan Ya Generic polybutylene terephthalate Material Status Commercial: Active Availabilitys Asia Pacific Technical Data Electrical performance Nominal value Unit Test method Arc resistance 110 sec ASTM D495 Insulation failure strength (3.2mm)…
About PULSE™ GX50 NA is a very low gloss appearance engineering resin which has exceptional impact strength even at low temperatures and has sufficient heat resistance for the majority of automotive interior components. This resin provides excellent flow, has low…
About LNP LUBRILOY ZX06315 is a compound based on PPE+PS Blend resin containing Flame Retardant, Proprietary Lubricant. Added features of this material include: Internally Lubricated, Non-Brominated u0026amp; Non-Chlorinated Flame Retardant, Flame Retardant, high HDT. Product Description Supplier SABIC Generic PPO(PPE)+SEBS+Polyolefin…