About Product Description Supplier Blueridge Tunhe Generic PBAT Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 190℃，2.16kg 5.0-10.0 g/10min Density 1.25-1.35 g/cm³ THERMAL Nominal value Unit Test method Vicat Softening Temp A50 90…
About King Pearl® B Series are energy saving materials for vaccum molding machines. Available variations: B-MS: 1.0 – 1.6 mm particle size and 14 – 16 g/l foam density. B-SA: 0.8 – 1.2 mm particle size and 16 – 18…
About PPE+PP blend. High Impact, Good Heat Resistance&& Product Description Supplier SABIC Generic PPO(PPE)+PS+PP Material Status Commercial: Active Features High impact resistance,High Heat Resistance,HB Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.968 g/cm³ ASTM…
About INFUSE™ 9100 Olefin Block Copolymer is a high performance olefin block copolymer that can be widely used in thermoplastic elastomer applications where higher service temperature requirements are needed. INFUSE 9100 exhibits very good processability in various extrusion processes. INFUSE…
About Product Description Supplier EMERY Generic 抗静电剂 Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About DuPont™ Teflon ® FEP 9495 is a melt-processible fluoroplastic resin available in pellet form. It is a copolymer of tetrafluoroethylene and hexafluoropropylene, without additives, that meets the requirements of ASTM D 2116 type II. With a relatively high melt…
About ASAXC811 is a type of high heat-resistance grade of ASA resin, with excellent weatherability, high rigidity and toughness. Application:automotive exteriors like radiator grille, pillar board, rearview mirror, licence plate borad, etc.&& Product Description Supplier KumhoSunny Generic ASA Material Status…
About Fortron 4332L6 is a glass fiber/mineral filled injection molding grade, which is intended for applications requiring improved tensile and flexural properties, when compared to other GF/MIN reinforced PPS grades. The recommended processing parameters are similar to the standard grades.&&…
About STYRON A-TECH™ 1170 is a High Impact Polystyrene material. It is available in Latin America or North America for extrusion or injection molding. Important attributes of STYRON A-TECH™ 1170 are: Flame Rated Food Contact Acceptable Good Processability Impact Resistant…
About Torlon® 5030 is a 30% glass-fiber reinforced grade of polyamide-imide (PAI) resin. It offers high strength and modulus and exceptional creep resistance. It has thermal expansion characteristics similar to aluminum and therefore excellent dimensional stability. Torlon® PAI has the…