About Styroflex® 2G66 is a styrene-butadiene block copolymer (SBC) with the properties of a thermoplastic elastomer (S-TPE) suitable for extrusion (blown and cast film) and for injection molding. Styroflex® 2G66 is also used for polymers modification and compatibilization. It is…
About Luran® 358N is the general purpose easy-flow grade of SAN, suitable for moldings with very thin walls and / or adverse flow length to wall ratio. It features very good transparency and a light intrinsic color. FEATURES Excellent transparency…
About Polyether block amide Pebax® MV 1041 SA 01 MED resin is a thermoplastic elastomer made of flexible and hydrophilic polyether and rigid polyamide. Hydrophilic Pebax® MV 1074 SA 01 MED resin is suitable for extrusion or coextrusion and offers…
About TECHNO ABS 420 is an Acrylonitrile Butadiene Styrene (ABS) product. It can be processed by injection molding and is available in Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated.&& Product Description Supplier Techno Generic ABS…
About Product Description Supplier BASF Generic PIB Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Ultraform N 2310 P Q600 is a general-purpose injection molding POM grade containing special lubricant. Low frictional coefficient giving extremely low wear with otherwise unaltered mechanical properties. Applications Typical applications include spring elements, clips, gears and other applications requiring…
About J-120C is homo polymer resin produced through the polymerization of propylene. This grade is designed to be processed in conventional Injection molding equipment. J-120C shows good thermal stability and has high strength and stiffness. It has broad range of…
About Product Description Generic Linear low density polyethylene Material Status Commercial: Active Features Good flexibility,Smoothness,High anti-blocking,Machinable,Good Tensile Strength,Low density,Butylene copolymer,Puncture Resistant Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 0.918 g/cm³ ASTM D792 Melt Flow Rate…
About Super Toughened, UV Stabilized, Polyamide 66&& Product Description Supplier DuPont Generic PA66 Material Status Commercial: Active Features Weather resistance is good,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data MECHANICAL Nominal value…
About LNP LUBRICOMP RN001S is a compound based on Nylon 66 resin containing 2% MOS2. Added features of this material include: Wear Resistant, Heat Stabilized.&& Product Description Supplier SABIC Generic PA66 Material Status Commercial: Active Features Lubricating,Good wear resistance,Heat Stabilized…