About AvaSpire® AV-750 GF40 is a 40% glass reinforced polyaryletherketone (PAEK)designed to fill the marketplace need for a lower-priced PEEK (polyetheretherketone). This resin provides the typical chemical resistance expected of PEEK while maintaining excellent elevated temperature properties. The price and…
About Impact Modified – Mineral – Fast-Cycle Nucleator – 68% Renewable Resource Content&& Product Description Generic PLA Material Status Commercial: Negative Features High impact resistance,Renewable resources,Nucleation Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical…
About Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.2 g/cm³ ISO 1183 Melt Flow Rate 300℃，1.20kg 17 g/10min ISO 1133 MECHANICAL Nominal value Unit Test…
About Product Description Generic PPO(PPE) Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method tensile strength 65 MPa ISO 527 elongation at break 12 % ISO 527 bending strength 105 MPa ISO 178 Bending modulus 2.5×103 MPa…
About Injection Molding, Drinking Water Grade&& Product Description Supplier DSM Generic TPC-ET Material Status Commercial: Active Features HB Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.16 g/cm³ ISO 1183 Melt…
About SEETEC XL610 resin is produced by ExxonMobil Chemical’s autoclave process technology. SEETEC XL610 resin is an excellent raw material in the application of extrusion coating.&& Product Description Supplier LOTTE Generic LDPE Material Status Commercial: Active Availabilitys North America,Asia Pacific,Europe…
About AFFINITY* PL 1881G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed for a variety of demanding packaging applications, including high-speed form-fill-seal products. Excellent ultimate hot tack strength Low temperature sealability Ability to seal through contamination Outstanding…
About Altuglas® V060 is a Polymethyl Methacrylate Acrylic product. It is available in Asia Pacific or Europe. Primary characteristic: flame rated.&& Product Description Supplier Trinseo Material Status Commercial: Active Availabilitys Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method…
About Indorama PET 3301 B-PET is a Polyethylene Terephthalate (PET) material. It is available in Latin America for injection molding. Important attributes of Indorama PET 3301 B-PET are: Eco-Friendly/Green Clarity Copolymer Food Contact Acceptable Good Dimensional Stability Typical applications include:…
About Lupoy® GN1000F is a Polycarbonate (PC) material. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of Lupoy® GN1000F are: Flame Rated Flame Retardant Halogen Free Typical application of Lupoy® GN1000F:…