About 50% Glass Reinforced, Low Outgassing&& Product Description Supplier DSM Generic PET Material Status Commercial: Active Features Low odor,HB Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.78 g/cm³ ISO 1183 Shrinkage rate ISO 294-4 TD…
About Features and Benefits Meets ASTM D 4894 Type IV, Grade 2 resin Molding and ram extrusion powder with very good free-flow properties Good metering properties Good mold filling behavior ldeal for large billets Good electrical and mechanical properties Used…
About Product Description Generic POM Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt flow rate 190℃,2.16kg 3.5 g/cm³ GB/T 3682-2000 THERMAL Nominal value Unit Test method Hot deformation temperature Method B -120 ℃ 84 ℃…
About Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Features Flame Characteristics Availabilitys North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.0 ASTM D792 Melt Flow Rate 230℃，2.16kg 16 g/10min…
About KYDEX® 510 is a weatherable sheet with superior performance for thermoforming and a decorative sheet for lamination. It is available in many distinctive colors and textures. An acrylic cap protects the surface, providing excellent weatherability for outdoor use. This…
About Silopren LSR 2671 TP 3733 is a two-component liquid silicone rubber for injection moulding processes.Silopren LSR 2671 TP 3733 shows in comparison to Silopren LSR 2670 as non post-cure grade (NPC grade)a lower compression set after vulcanisation. Key Features…
About ADMER™ AT3177E is a maleic anhydride grafted PP-based adhesive especially designed for vacuum metallized cast PP and oriented PP (VM-CPP & VM-BOPP). It offers enhanced bonding to metallization layers while maintaining a high surface gloss.&& Product Description Supplier Mitsui…
About Luran® S 796M is suitable for extrusion and injection molding. It provides a medium flowability and enhanced impact strength. FEATURES Enhanced impact strength Medium flowability APPLICATIONS Sheets Truck cabin parts&& Product Description Supplier INEOS Material Status Commercial: Active Features…
About MVR (300 °C kg) 6.0 cm³/10 min; general purpose; high viscosity; easy release; injection molding – melt temperature 280 – 320 °C; available in transparent, translucent and opaque colors&& Product Description Supplier Covestro Generic Polycarbonate Material Status Commercial: Active…
About Description High Flow, Metal Plating Application Decorative Parts (Home Appliance Door Handle Etc)&& Product Description Supplier LG Chemical Generic ABS Material Status Commercial: Active Features High liquidity,Electroplating Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL…