About Optical lens grade, high flow for microlens, very low haze and low birefringence for mobile device camera lens Features High transparency High flow Low birefringence Low haze Low moisture absorption Good coatability Uses Optical Lens Consumer electronics Camera lens…
About PPE+PS blend. 10% Glass reinforced. Non-brominated, non-chlorinated FR system. UL94 V1 listing. RTI 110 Dielectric strength. Dimensional stability. Suitable for E/E applications.&& Product Description Supplier SABIC Generic PPO(PPE)+PS Material Status Commercial: Active Features Good Dimensional Stability,Hydrolysis stability,Good liquidity,Halogen free,Flame…
About Product Description Supplier Aramco Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 0.91 g/cm³ ISO 1183 Isometric index 97.2 % SH/T 1774 Melt Flow Rate 230℃，2.16kg 3.4 g/10min GB/T 3682…
About 30% Glass Reinforced, Flame Retardant, Halogen free and free of red phosphorous, Improved color stability&& Product Description Supplier DSM Generic PA 4T Material Status Commercial: Active Features Flame Characteristics,Low to no phosphorus content Availabilitys Africa & Middle East ,North…
About Outline: FZ-2140-B2 is a 40% glass fiber reinforced linear polyphenylene sulfide compound with excellent engineering properties and high flowability. Color: Black and Natural&& Product Description Supplier DIC Corporation Generic PPS Material Status Commercial: Active Features High liquidity,V-0 Availabilitys North…
About (PC+ABS)-Blend; flame retardant; Vicat/B 120 temperature = 108°C; HDT/A >= 85°C; for thin-wall applications; very good burning behavior in small wallthicknesses (UL recognition 94 V-0 at 0.75 mm and above and V-1 at 0.6 mm)&& Product Description Supplier Covestro…
About Optical glade&& Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Active Features High liquidity Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.20 g/cm³…
About Radel® R-5500 is a general purpose extrusion grade of polyphenylsulfone (PPSU), offering exceptional hydrolytic stability and better toughness than most commercially available high-temperature polymers. This resin has a high heat deflection temperature, excellent thermal stability, outstanding resistance to environmental…
About Celanex 2016 is a non-exuding flame retarded (UL and CSA approved V-0 at 1/32 inch and 5V at 1/8 inch), unreinforced polybutylene terephthalate which has an excellent balance of mechanical properties and processability. It is well suited for electrical…
About Product Description Generic EVA Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…