About NORYL N1150 is an unfilled, injection moldable modified polyphenylene ether resin. Designed for good dimensional stability and good flow, this resin also uses non-chlorinated, non-brominated FR additives to achieve a V0 UL94 rating at 0.75 mm with a specific…
About Product Description Generic Linear low density polyethylene Material Status Commercial: Active Features Good flexibility,Smoothness,High anti-blocking,Machinable,Good Tensile Strength,Low density,Butylene copolymer,Puncture Resistant Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 0.918 g/cm³ ASTM D792 Melt Flow Rate…
About Torlon® 4275 is a wear-resistant grade of polyamide-imide (PAI). This grade offers an excellent balance of mechanical properties and wear resistance. It offers high tensile strength and modulus with a low coefficient of friction and outstanding wear resistance at…
About Product Description Generic 通用型玻纤 Material Status Commercial: Active Features Machinable Technical Data PHYSICAL Nominal value Unit Test method Linear density deviation ±5 % ISO 1889 Moisture content ≤0.1 % ISO 3344 combustible matter content 0.25±0.10 % ISO 1887 tear…
About Grilamid® LV-5H is a Polyamide 12 (Nylon 12) material filled with 50% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of Grilamid® LV-5H are:…
About Styrolution PS 576H is a high gloss, high impact polystyrene with a good flow and good heat resistance. FEATURES High gloss HIPS Good flow and heat resistance HIPS with good balance of mechanical properties and surface gloss APPLICATIONS Air…
About Vydyne R530H is general-purpose, heat-stabilized, hydrolysis-resistant, 30% glass-fiber reinforced PA66 resin. Available in natural, it is specifically designed to maximize the retention of physical properties when exposed to anti-freeze solutions at elevated temperatures. This product is also lubricated for…
About Product Description Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt flow rate 3.3 g/10min other Nominal value Unit Test method Isometric index 97.92 % Appearance particles 未检出 个/kg 黑粒 Yellow…
About CYCOLOY CX7211 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) resin is an enhanced performance & processibility grade that can be injection molded. This non-chlorinated, non-brominated flame retardant PC/ABS has a UL V0 & 5VA/B flame rating. CYCOLOY CX7211 resin is an excellent…
About Product Description Generic HDPE Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Tensile yield stress 25 MPa BP 13B/1 elongation at break 1000 % BP 13B/1 Bending modulus 1000 MPa ISO 178-1975 Impact resistance F50…