About Titacon® GF910 is an Acetal (POM) Copolymer material filled with 10% glass fiber. It is available in Asia Pacific. Important attributes of Titacon® GF910 are: Flame Rated Good Dimensional Stability High Stiffness High Strength&& Product Description Supplier Titan Generic…
About Product Description Supplier SABIC Generic PC+ABS Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method tensile strength fracture 35 MPa ISO 527 fracture 45 MPa ASTM D638 yield 55 MPa ISO 527 yield 58 MPa ASTM…
About Description Heat Resistance, Impact Strength , High Toughness Application Helmet&& Product Description Supplier LG Chemical Generic PC+ABS Material Status Commercial: Active Features Good flexibility,High impact resistance,Heat Resistance, Good Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data…
About Description Heat Resistance, High Flow, High Impact. Application Automotive(Interior)&& Product Description Supplier LG Chemical Generic PC+ABS Material Status Commercial: Active Features High impact resistance,High liquidity,Heat Resistance, Good Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL…
About Product Description Supplier CHI MEI Material Status Commercial: Negative Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 200℃，5.0kg 1.8 cm³//10min ISO 1133 200℃，10kg 18 cm³/10min ISO 1133 Density 23℃ 1.04 ASTM D792 MECHANICAL…
About SERIES 25 SPECIAL ESTER Products based on special grade saturated polyester. The features are similar to those of Series 20 but are characterised by a higher resistance to hydrolysis failure and improved flexibility at low temperatures.&& Product Description Generic…
About DURACON® M90-44 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Automotive. Primary characteristic: flame rated.&& Product…
About Product Description Supplier Polyplastics Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About Product Description Supplier Polyplastics Generic 液态聚合物 Material Status Commercial: Negative Features V-0,Good Dimensional Stability Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.63 g/cm³ ISO 1183 Shrinkage rate Internal Method TD： 0.03 % Internal…
About Product Description Supplier Polyplastics Generic polybutylene terephthalate Material Status Commercial: Negative Features V-0 Availabilitys North America,Europe,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.60 g/cm³ ISO 1183 MECHANICAL Nominal value Unit Test method tensile strength fracture…