About Celanex 3300 is a general purpose, 30% glass reinforced, polybutylene terephthalate that offers a superior combination of mechanical, electrical, and thermal properties. This grade provides outstanding processability and good chemical resistance. Celanex 3300 is a high flow material.&& Product…
About Amodel® A-4422 LS resin is a 22% reinforced, light-stabilized, high-reflectivity white grade of polyphthalamide (PPA). The material exhibits high heat resistance, high strength and stiffness over a broad temperature range, low moisture absorption, excellent chemical resistance, and excellent electrical…
About MVR (300°C kg) 19 cm³/10 min; flame retardant; UL 94V-2 mm and 3.0 mm; low viscosity; UV stabilized; easy release; injection molding – melt temperature 280 – 320°C; available in transparent, translucent and opaque colors&& Product Description Supplier Covestro…
About DURACON® YF-20 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated Lubricated Wear Resistant&& Product…
About Product Description Generic SAN Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About Product Description Material Status Commercial: Negative Technical Data MECHANICAL Nominal value Unit Test method tensile strength 50mm/min 318 kg/cm² ASTM D638 bending strength 15mm/min 627 kg/cm² ASTM D790 Bending modulus 15mm/min 18000 kg/cm² ASTM D790 Rockwell hardness 90 R…
About TAIRILAC® WE8100 is an Acrylonitrile Styrene Acrylate (ASA) product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Primary characteristic: reach compliant.&& Product Description Generic ASA Material Status Commercial: Active Availabilitys North…
About Product Description Generic PC+ABS Material Status Commercial: Negative Process Methods Injection Molding Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of…
About 30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.&& Product Description Supplier SABIC Generic Polyetherimide Material Status Commercial: Active Features V-0,5VA Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…
About Product Description Generic Polycarbonate Material Status Commercial: Active Features Good stripping performance Technical Data PHYSICAL Nominal value Unit Test method Melt Volume Rate 300℃，1.2kg 12 cm³/10min ISO 1133 Tensile molding shrinkage rate flow 0.5 – 0.7 % SABIC 方法…