About Product Description Supplier INEOS Material Status Commercial: Negative Features Good Rigidity,Moderate liquidity,Good surface appearance Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Melt Volume Rate 220℃，10 kg 24 cm³/10min ISO 1133 IMPACT Nominal value Unit…
About Product Description Supplier INEOS Material Status Commercial: Negative Features Good Rigidity,Moderate liquidity,Good surface appearance Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Melt Volume Rate 220℃，10 kg 22 cm³/10min ISO 1133 IMPACT Nominal value Unit…
About Product Description Supplier NHU Material Status Commercial: Negative Features Solvent resistance,Flame Characteristics,High Viscosity Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1360 kg/m³ ISO 1183 Forming shrinkage rate TD 1.2 % MD 1.8…
About Radel® R-5000 is a transparent polyphenylsulfone (PPSU) which offers exceptional hydrolytic stability, and toughness superior to other commercially-available, high-temperature engineering resins. This resin also offer high deflection temperatures and outstanding resistance to environmental stress cracking. Radel® polymers are inherently…
About 高流动,易脱模型・ 冰色 Product Description Supplier Idemitsu Generic Polycarbonate Material Status Commercial: Active Features High liquidity,Good stripping performance Availabilitys Asia Pacific Technical Data MECHANICAL Nominal value Unit Test method Tensile (yield) strength 65 MPa ISO 527-1 Tensile strain fracture 95…
About Heat Stabilized, Lubricated&& Product Description Supplier DSM Generic PA 46 Material Status Commercial: Active Features Lubricating,Heat Stabilized Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.18 g/cm³ ISO 1183 Shrinkage rate ISO 294-4…
About 20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.&& Product Description Supplier SABIC Generic Polyetherimide Material Status Commercial: Active Features ECO,V-0,5VA Availabilitys North America,Asia Pacific,Europe Process Methods Injection…
About Amodel® AS-4133 HS is a 33% glass reinforced, lubricated, heat stabilized grade of polyphthalamide (PPA) that offers fast cycle times and moldability in hot water molds. Testing conducted on samples dry as molded and samples conditioned to 50% relative…
About Luran® 368R is a general purpose grade of SAN with well-balanced properties, suitable for injection molding and extrusion. It features very good transparency, good heat resistance and very good dimensional stability. FEATURES Excellent transparency Good surface appearance Good chemical…
About Ryton® R-7-120NA and R-7-120BL glass fiber and mineral filled polyphenylene sulfide compounds provide good strength and low maintenance molding using conventional molding equipment.&& Product Description Supplier Solvay Generic PPS Material Status Commercial: Active Features Good Rigidity Availabilitys North America,Latin…