About 3M™ Dyneon™ PTFE Compound TF 7681 is a non-free-flowing suspension PTFE compound containing 25% Ekonol® for compression moulding. Ekonol® is a Trademark of Saint-Gobain Group Special Features Increased thermal dimensional stability Increased surface hardness Improved deformation under load Reduced…
About Product Description Generic PP not specified Material Status Commercial: Active Technical Data THERMAL Nominal value Unit Test method Electrical performance Nominal value Unit Test method MECHANICAL Nominal value Unit Test method PHYSICAL Nominal value Unit Test method Density Notes…
About EVA resin ALCUDIA® PA-461 is recommended for hot melt adhesives applications, when toughness and flexibility are required. It contains antioxidant and free flowing agent. TYPICAL APPLICATIONS Hot Melt Adhesives Packaging Bookbinding Pressure sensitive adhesive coatings Recommended melt temperature below…
About NORYL APS* EXNX0080 resin is a glass filled, high performance blend of PPE/PPS that exhibits an excellent balance of high-heat resistance, strength, flame retardant, and conductivity. This grade can be electro-statically painted or powder coated without the need for…
About Polifil ® T series compounds are homopolymer polypropylene resins reinforced with asbestos-free talc. They possess high flex modulus, high deflection temperature, good chemical resistance and colorability, low shrinkage and yield maximum stiffness combined with characteristic impact. Polifil ® T…
About PLUSTEK PA103NT is Natural, Low Viscocity POLYAMIDE 66, Extrusion u0026amp; Injection Molding Applications Product Description Supplier Ram-On Generic PA66 Material Status Commercial: Active Features Low Viscosity Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding…
About 50% long glass fiber reinforced polyamide 6. High Stiffness & superior mechanical balanced.&& Product Description Generic PA6 Material Status Commercial: Active Features Good Rigidity,Good flexibility,HB Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…
About Main features developed for the LPKF-LDS® process Target Industries electrical engineering mechanical engineering medical technology Product Description Supplier Ensinger Generic PEEK Material Status Commercial: Active Availabilitys Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method…
About PTFE Lubricated&& Product Description Generic Polyetherimide Material Status Commercial: Negative Features Lubricating,V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.35 g/cm³ ASTM D792 Shrinkage…
About The pellet product is colourless and in the shape of a cylinder with satisfied strength, abrasion performance and chemical stability, as well as fairly good heat-resistance. Scope of Application: Flat fibre and small injection moulding.&& Product Description Supplier SINOPEC…