About Baydur 641 IBS is a rigid polyurethane structural foam system used in the reaction injection molding (RIM) process. This system is supplied as two reactive liquid components and is typically used with a blowing paste purchased separately. Component A…
About Ferro PP TPP40AC28HB-NA is a Polypropylene Homopolymer (PP Homopolymer) product filled with 40% talc. It is available in Latin America or North America. Typical application: Automotive. Characteristics include: Good Dimensional Stability Homopolymer Low Shrinkage&& Product Description Supplier Ferro Generic…
About Product Description Supplier Lubrizol Advanced Materials Generic TPU Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of…
About PC+ASA-Blend; Vicat/B 120 temperature = 115°C; UV-stabilized; very good surface finish&& Product Description Supplier Covestro Generic ASA+PC Material Status Commercial: Active Features Weather resistance is good,Good surface appearance Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data…
About PolyAxis LP-8000 is a high density polyethylene intended for the rotational molding industry. This stiff yet tough compound has been used in watercraft with good success.&& Product Description Supplier A. Schulman Generic mHDPE Material Status Commercial: Active Availabilitys North…
About Characteristics Polyvinyl butyral (PVB) grades with different molecular weights, and varying degrees of acetalization. Recommended Uses Binder for coatings (adhesion promotion/corrosion protection primers, shop primers, wash primers, stoving enamels, varnishes and lacquers for different substrates). Binder for printing inks.…
About AOC’s Vipel F707-PVA series are isophthalic-NPG, two stage, unsaturated polyester resins. The wet-out, cure and handling characterisitcs are typical of general purpose resins. BENEFITS PVC Bonding Laminates made with Vipel F707-PVA resin bond to PVC. Versatile Suitable for various…
About Keliren® Chlorinated Polyethylene(CPE) thermoplastic resins are widely used as impact modifiers in PVC extrusion and injection molding applications, especially in products such as siding, widow profiles and pipe. The low dosage levels of Keliren® resins with rigid PVC resins…
About PP Unfilled Flame Retartant PBDE-Free&& Product Description Supplier A. Schulman Generic PP not specified Material Status Commercial: Active Features Flame Characteristics,V-2 Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 0.930 g/cm³ ASTM D792 Shrinkage rate…
About Migration stabilised bedding compound for PVC insulation and PVC sheathing. Bedding compound for cables and wire with max. 90°C operating temperature at conductor.&& Product Description Generic EPM Material Status Commercial: Active Features Halogen free,Low to no mobility Availabilitys Africa…