About Formolene 5143C is a polypropylene homopolymer designed for sheet and thermoforming applications, which require exceptional clarity. It contains a unique combination of stabilizers, nucleators and anti-stats that give it an excellent balance of stiffness and impact strength. Formolene 5143C…
About ADVANCENE™ bEE-4906-AAH is a thermally stabilized bimodal high molecular weight high density polethylene – hexene copolymer, produced using advanced gas phase PE process in a single reactor. It is intended for use in PE-100 pipe applications where the highest…
About Intol® 1783 is an emulsion styrene-butadiene rubber obtained by cold polymerisation using a mixture of rosin acid and fatty acid soaps as emulsifiers. It is made at the Hythe production facility in UK. It is a medium bound styrene…
About NANCAR® 3375 is a medium high acrylonitrile butadiene copolymer with excellent oil resistance. It is polymerized at low temperature and contains sufficient stabilizer for normal aging conditions. It has excellent processing characteristics, excellent physical properties, low mold fouling, well…
About HYTEMP® POLYACRYLATE (ACM) elastomers are ideally suited for applications requiring long-term performance in severe temperature and fluid environments. HyTemp can be compounded to withstand an impressive temperature range from -40°C to 200°C. These elastomers offer excellent long-term heat and…
About HBG00346 High Density Polyethylene Resin manufactured by IEPL using “SCLAIRTECH” solution polymerisation process of DU Pont, Canada (Now Nova Chemicals) offers medium molecular weight material with broad molecular weight distribution. As a copolymer it combines very high impact and…
About Monprene CP-29353 NAT XRD1, available in NAT, is a high performance thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-29353 NAT XRD1 is a low density, medium hardness, lubricated grade that…
About The Nipol NS series is produced by solution polymerization; its polymer structure is tightly controlled using an organic lithium catalyst. NS116R is used as rubber for high-performance tires that offer both excellent grip capability and fuel efficiency, based on…
About Product Description Generic Copolymer Polyformaldehyde Material Status Commercial: Active Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.48 g/cm³ ASTM D792 Water absorption rate 23℃，60%RH 0.22 % ASTM D570 Melt Flow Rate 13 g/10min…
About Mylar® EL (142 guage) is a Polyethylene Terephthalate (PET) product. It is available in North America. Applications of Mylar® EL (142 guage) include coating applications, electrical/electronic applications and film. Characteristics include: Chemical Resistant Good Flexibility Heat Resistant High Strength&&…