About EVALENE ® HP10441 provides a cost-effective solution for various piping applications including potable water, sewer, industrial, agricultural, mining, landfll, electrical and elecommunications duct applications. Pipes made using EVALENE ® HP10441 are flexible, have excellent fatigue, impact and abrasion resistance.…
About Adsyl 5 C 33 F is an advanced polyolefin, specially designed for use as a sealing or metallized layer in co-extruded film applications. This grade features a very low seal initiation temperature and good optics. It does not contain…
About BB-AMIDE 5036 a high viscosity reactive polyamide resin. This product is designed for use with solid or liquid epoxy resins to give tough, chemical resistance, thermoset coatings using room temperature cure. BB-AMIDE 5036/epoxy resins systems are used in maintenance…
About A very wide range of Evoprene™ G compounds is available for applications in all sectors of industry. The range is based on the widely specified SEBS (styrene – ethylene butylene – styrene) and related hydrogenated block copolymers. These polymers…
About For inventory control purposes product name may be followed by an X. Products labeled PFA 945HP Plus and PFA 945HP Plus X are equivalent and all information in this document is applicable to both. Typical Application With a typical…
About Absolac® 200EP is an electroplating grade FEATURES Electroplating grade APPLICATIONS Metallised Automotive parts Camera parts Sanitary fittings Fishing reels Fan Caps&& Product Description Supplier INEOS Generic ABS Material Status Commercial: Active Features Electroplating Availabilitys Asia Pacific Technical Data PHYSICAL…
About BCC Products now offers a truly metal-like machineable modeling plank for today’s demanding applications. MB 8250 is an aluminum filled product that is dimensionally stable and exhibits unsurpassed machinable properties.&& Product Description Generic PUR Material Status Commercial: Active Features…
About SABIC®SUPEER™7318BE是茂金属乙烯 – 己烯共聚物。 它具有良好的加工性能，在各种通用和高性能流延薄膜应用中表现良好。 用这种等级生产的薄膜具有良好的冲击强度，抗穿刺性，密封性和光学性能。 SABIC®SUPEER™7318BE通常用于拉伸和层压薄膜。 本产品不适用于任何制药/医疗应用，也不得用于任何药品/医疗应用。 Product Description Supplier SABIC Generic mPE Material Status Commercial: Active Features High impact resistance,Good Tensile Strength,Puncture Resistant Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 190℃，2.16kg 3 g/10min ASTM…
About CYCOM® 977-3 is a 350°F (177°C) curing resin. It is a toughened epoxy resin with 350°F (177°C) dry and 270°F (132°C) wet service capability. CYCOM 977-3 is formulated for autoclave or press molding and can be cured at 350°F…
About LOCTITE® SI 5620™ is a two-component silicone that will cure at room temperature or at elevated temperatures. After mixing, the material cures quickly to form a clear, very flexible elastomer.&& Product Description Supplier Henkel Generic 硅酮 Material Status Commercial:…