About Product Description Supplier DOMO Generic PA66 Material Status Commercial: Active Features V-0,High liquidity,Flame Characteristics Availabilitys Latin America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.46 g/cm³ ISO 1183/A Shrinkage rate ISO 294-4 TD…
About PolyOne’s Long Fiber Thermoplastic (LFT) compounds are formulated for demanding applications which require high stiffness and good impact such as metal replacement or other structural applications. These products exhibit enhanced physical and mechanical properties versus standard short fiber products.…
About Durethan® DP2325H3.0 000000 (Dry) PA 66, non-reinforced, injection molding, improved impact strength, heat-aging stabilized&&Durethan® DP2325H3.0 000000 PA 66, non-reinforced, injection molding, improved impact strength, heat-aging stabilized&&Durethan® DP2325H3.0 000000 PA 66, non-reinforced, injection molding, improved impact strength,…
About Value Product – Glass Fiber – Heat Stabilized&& Product Description Generic PA66 Material Status Commercial: Negative Features Heat Stabilized,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…
About 40% Mineral/Glass-Reinforced Nylon Resin (PA66)&& Product Description Supplier Wellman Generic PA66 Material Status Commercial: Active Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.49 g/cm³ ISO 1183 Shrinkage rate…
About Product Description Supplier DOMO Generic PA66 Material Status Commercial: Active Features Grease resistance Availabilitys Europe,Africa & Middle East Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.32 g/cm³ ISO 1183/A Shrinkage rate Internal Method…
About Chemlon® 104 H is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of Chemlon® 104 H are: Flame Rated Good Processability Good Toughness Heat Stabilizer High…
About ALCOM® PA66 910 CF10 PTFE10IM is a Polyamide 66 (Nylon 66) product filled with 10% carbon fiber and 10% ptfe fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical…
About Product Description Supplier DOMO Generic PA66 Material Status Commercial: Active Features Heat Stabilized,Ethylene glycol Availabilitys Asia Pacific Process Methods Injection Molding Technical Data Process Conditions Injection Nominal value Unit Test method drying temperature 80.0 °C Recommended maximum moisture content…
About Product Description Generic PA66 Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 g/cm³ ISO 1183 ash content 25-27 % ISO 3451-4 MECHANICAL Nominal value Unit Test method Bending modulus 2 mm/mim 2500 MPa…
About DINALON® PA 6.6 15% FV is a Polyamide 66 (Nylon 66) product filled with 15% glass fiber. It can be processed by injection molding and is available in Europe. Primary characteristic: flame rated.&& Product Description Generic PA66 Material Status…
About Product Description Supplier SH shenma Generic PA66 Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.55 g/cm³ ISO 1183 Shrinkage rate 0.3-0.8 % ISO 294/4 MECHANICAL Nominal value Unit Test method tensile strength 230…
About Nylon 66, Impact Modified&& Product Description Generic PA66 Material Status Commercial: Active Features High impact resistance,HB Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.10 g/cm³ ISO 1183 Shrinkage rate MD：3.2 mm 1.6 to 2.0…
About Product Description Supplier SH shenma Generic PA66 Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.4 g/cm³ ISO 1183 Shrinkage rate 0.3-0.9 % ISO 294/4 MECHANICAL Nominal value Unit Test method tensile strength 200…
About Polyammide 66 with 40% mineral reinforcement, high dimensional stability, high rigidity, good mechanical and thermal properties, good surface finish.&& Product Description Generic PA66 Material Status Commercial: Active Features Good Rigidity,Good surface appearance,Good Dimensional Stability,HB Availabilitys Europe Process Methods Injection…
About Product Description Supplier SABIC Generic PA66 Material Status Commercial: Active Features Lubricating,Good wear resistance,Heat Stabilized Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.51 g/cm³ ASTM D792 Density 1.51 g/cm³…
About Polyamide 66 medium viscosity 30% glass fibres reinforced, heat stabilized, flame retardant UL94 V0, good flow, high electrical and mechanical properties, good dimensional stability.&& Product Description Generic PA66 Material Status Commercial: Active Features Good Dimensional Stability,Good Electrical Properties,Good liquidity,Flame…
About EP127 is an injection molding Nylon 66 resin. This resin offers a well-balanced combination of engineering properties characterized by good toughness; high impact; good surface lubricity: abrasion resistance; self-extinguishment. Typical Applications As an injection molding resin, EP127 is suitable…
About Chiao Fu PA66 MD212STG33 NAT is a Polyamide 66 (Nylon 66) product filled with 33% glass fiberstainless steel fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic: rohs compliant.&& Product Description Supplier Chiao Fu Generic…
About Polyamide 66 medium viscosity, 25% glass fiber reinforced, UL94 V0 self extinguishing, very good flame proofing also at low thickness, good processing and good mechanical properties. UL94 V0 approved all colors at 0,88 mm. UL746B approved. Available: different colors,…