About Epalex PDR 7413/6 UV3 7A13 is a thermoplastic rubber modified mineral filled polypropylene compound. It is a very high flow injection moulding grade developed for high impact strength and high rigidity at high ambient temperatures, low SG and moderate…

About Product Description Generic PP not specified Material Status Commercial: Active Technical Data THERMAL Nominal value Unit Test method Hot deformation temperature 95 ℃ ASTM D-648 Flammability HB UL 94 Other performance Nominal value Unit Test method Residual rate 20…

About Cheng Yu HG325 is a Polypropylene product filled with 25% mineral. It is available in Asia Pacific. Primary characteristic: flame rated.&& Product Description Supplier Cheng Yu Generic PP not specified Material Status Commercial: Active Features HB Availabilitys Asia Pacific…

About IPC PP 4830H-MLGF8-R2-UV是一种聚丙烯材料,含有的填充物为32% 玻璃矿物。 该产品在北美洲有供货,。&& Product Description Generic PP not specified Material Status Commercial: Active Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.17 g/cm³ ASTM D792 Melt Flow Rate 230℃，2.16kg 25 g/10min ASTM D1238…

About Hifax TYC 2048P is a 14% talc filled elastomer modified PP, with high melt flow rate, good impact/stiffness balance and excellent scratch resistance. This grade is delivered in customer customized colors, this Data Sheet is giving general properties, some…

About SABIC® STAMAX 40YM240 is a 40% long glass fiber reinforced polypropylene. The glass fibers are chemically coupled to the PP matrix, resulting in high stiffness and strength. The IMDS is 16497161.&& Product Description Supplier SABIC Generic PP not specified…

About MAJORIS DG507X – 8229 is a high performance reinforced polypropylene compound intended for injection moulding. The product is available in natural, but other colours can be provided on request. MAJORIS DG507X – 8229 has been developed especially for demanding…

About WD170CF is a polyolefin resin suitable for the manufacturing of non-oriented sterilisable peelable cast films on chill roll processes. CAS-No. 9010-79-1 & 9002-88-4 Applications: WD170CF has been evaluated according to different regulations and norms. Typical applications are mentioned below…

About 30% long glass fiber reinforced polypropylene – UV stabilized&& Product Description Supplier Celanese Generic PP not specified Material Status Commercial: Active Features Weather resistance is good Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal…

About Polypropylene copolymer reinforced with 20weight percent long glass fibers. Low emission. The fibers are chemically coupled to the polypropylene matrix. The pellets are cylindrical and normally as well as the embedded fibers 10 mm long.(-0553 = Low emission grade)…

About Daicel PP PG4N1 is a Polypropylene material filled with 20% glass fiber. It is available in Asia Pacific. Primary attribute of Daicel PP PG4N1: Flame Rated.&& Product Description Supplier Daicel Generic PP not specified Material Status Commercial: Active Features…

About PTFA 12 is a tough and rigid halogen-free compound designed for injection moulding engineering components. Initially developed for moulding escalator comb sets, it has since proved beneficial in other electrical components because of its stiffness and durability. It can…

About Product Description Generic PP not specified Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…

About SI81R is a high-gloss polypropylene compound specially processed for high-flowability and low deformation. TOTAL engineering has resulted in impressively improved grades that are far superior to the low gloss, low productivity and high-warp characteristics extant in other brands. This…

About Product Description Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method proportion 0.95 g/cm³ ASTM D792 Mold shrinkage rate 1.2-1.7 % ASTM D955 Melt flow rate 15-20 g/10min ASTM D1238 THERMAL Nominal…

About ALTECH® PP-B B 4920/526 MR20 UV is a Polypropylene product filled with 20% talc. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of ALTECH® PP-B B 4920/526 MR20 UV…

About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade.&& Product Description Generic PP not specified Material…

About Material code according to ISO 1043-1: PP Polypropylene with 45 weight percent ash content, long glass fibers reinforced. The fibers are chemically coupled to the polypropylene matrix. The pellets are cylindrical and normally as well as the embedded fibers…

About FFR067 – 5168 is part of a new material family with low halogen no blooming flame retardant, high impact strength, high gloss and antistatic as well as an excellent UV-resistance and very low war page behaviour. Intended for injection…

About PP-GF60 60% Glass Fiber Reinforcement&& Product Description Supplier Asahi Kasei Generic PP not specified Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.49 g/cm³ ISO…