About Udel® P-3703 is a high-flow grade of polysulfone intended for injection molding applications with thin walls or long flow lengths. This grade has higher flow than Udel® P-1700 and a slightly greater tendency to stress crack in some aggressive…
About PC+POLYESTER alloy. Unreinforced, transparent, impact modified for low temperature ductility&& Product Description Supplier SABIC Generic PC + Polyester Material Status Commercial: Active Features Good Clarity,High impact resistance,Ductility Availabilitys North America,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value…
About INNOPOL® CS 2-9110 is a 10% talc-filled compound based on polypropylene block-copolymer. This grade is available in nature and custom coloured form. INNOPOL® CS 2-9110 is developed for producing injection moulded automotive components.&& Product Description Generic PP copolymer Material…
About NYLOY® MG-0033N-V0 HG30N4 is a Polyamide 66 (Nylon 66) material filled with 30% glass fiber. It is available in Asia Pacific or North America. Important attributes of NYLOY® MG-0033N-V0 HG30N4 are: Flame Rated Flame Retardant Heat Resistant&& Product Description…
About HAC8240B is a blow molding grade PC/ABS resin. PC/ABSHAC8240B has been widely used in Auto exterior parts, such as Spoiler and so on.&& Product Description Supplier KumhoSunny Generic PC+ABS Material Status Commercial: Active Features High impact resistance,HB Availabilitys Asia…
About NYLOY® MG-0023N-V0 BK2 is a Polyamide 66 (Nylon 66) material filled with 34% glass fiber. It is available in Asia Pacific or North America for injection molding. Important attributes of NYLOY® MG-0023N-V0 BK2 are: Flame Rated Flame Retardant Halogen…
About KANEKA H527 is a Chlorinated Polyvinyl Chloride material. It is available in Latin America or North America.&& Product Description Supplier Kaneka Generic CPVC Material Status Commercial: Active Availabilitys North America,Latin America Technical Data MECHANICAL Nominal value Unit Test method…
About QAMAR FC18N is a Linear Low Density Polyethylene material. It is available in Africa & Middle East, Asia Pacific, Europe, or North America for blown film. Typical application of QAMAR FC18N: Film&& Product Description Generic Linear low density polyethylene…
About Product Description Supplier SUQING Material Status Commercial: Negative Features Excellent Processability,V-0 Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.66 g/cm³ ASTM D792 Shrinkage rate ASTM D955 MD 0.25 % ASTM D955 TD…
About Grilamid® 2SV-30H nat is a Polyamide 610 (Nylon 610) material filled with 30% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of Grilamid® 2SV-30H…