About HI-ZEX™ 7000F is a High Density Polyethylene product. It can be processed by film extrusion and is available in Asia Pacific, Europe, or North America. Typical application: Film. Primary characteristic: impact resistant.&& Product Description Generic HDPE Material Status Commercial:…
About Rilsamid® DMVO is an undried thermoplastic Polyamide 612 neat resin. This grade is also designed to produce tailored injection molding formulation via compounding.&& Product Description Supplier Arkema Generic PA612 Material Status Commercial: Active Availabilitys Africa & Middle East ,North…
About Siveras™ LX70M50 is a Liquid Crystal Polymer (LCP) product filled with 50% glassmineral. It is available in Asia Pacific, Europe, or North America. Applications of Siveras™ LX70M50 include electrical/electronic applications and appliances. Primary characteristic: flame rated.&& Product Description Supplier…
About Powder for coating systems VESTOSINT 1164 white respectively 1174 white are nylon 12 fine powders which are specially developed for the minicoat process of small articles, e.g. corsetry or ferrit rings. VESTOSINT 1164 white and 1174 white are used…
About CONATHANE EN-2550 is a two-part, filled polyurethane resin system formulated for casting high-voltage transformers and potting or encapsulating electronic devices. The system features good handling properties at room temperature, good working life, and minimum processing hazards. CONATHANE EN-2550 can…
About ARCEL® ULV (1.5 pcf) is a Polystyrene + PE (PS+PE) material. It is available in North America for foam processing.&& Product Description Generic PS+PE Material Status Commercial: Active Availabilitys North America Process Methods Foam treatment Technical Data PHYSICAL Nominal…
About Mylar® WC (48 guage) is a Polyethylene Terephthalate (PET) product. It is available in North America. Applications of Mylar® WC (48 guage) include wire & cable and electrical/electronic applications. Characteristics include: Good Dimensional Stability Good Toughness High Strength Wear…
About ICORENE® 6007 OSF is a linear low density polyethylene especially formulated with a foaming agent suitable for rotomoulding. This grade has been developed for the foam filling of structural rotational mouldings. ICORENE® 6007 OSF is intended to be used…
About PrimePart® ST (PEBA 2301) is a natural coloured powder of a polyether block amide, which is developed and optimised for the application in a Laser Sinter system. Laser-sintered parts made from PrimePart® ST (PEBA 2301) possess excellent material properties:…
About Injection Molding&& Product Description Supplier DSM Generic TPC-ET Material Status Commercial: Active Features HB Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.25 g/cm³ ISO 1183 Melt Volume Rate 230℃，2.16…