About Unreinforced High Viscosity Polybutylene Terephthalate Developed for Extrusion and Injection Molding&& Product Description Supplier DuPont Generic polybutylene terephthalate Material Status Commercial: Active Features High Viscosity,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Extrusion Technical Data…
About Silopren LSR 3485/50 is a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which…
About NORYL PPX™ PPX830 resin NORYL PPX830 Polyphenylene Oxide (PPO*) + Polypropylene (PP) resin is a 30 % Glass Reinforced, injection moldable grade with a HDT temperature resistance of 153 deg C and a Tensile modulus of 7600…
About POCAN® T7391 900044 POS151 PBT+PET, 45 % glass fibers, injection molding, improved surface finish, increased temperature peak load, UV-stabilized&&POCAN® T7391 900044 POS151 PBT+PET, 45 % glass fibers, injection molding, improved surface finish, increased temperature peak load, UV-stabilized&&POCAN®…
About E-glass fiber reinforced, thermoset polymer pultruded profiles (square, tube and rod)&& Product Description Supplier Polyone Generic 热固性复合材料 Material Status Commercial: Active Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density Curing treatment 1.80 to 2.00 g/cm³…
About DIALAC® S210B is an Acrylonitrile Styrene Acrylate (ASA) material. It is available in Asia Pacific or North America for injection molding. Primary attribute of DIALAC® S210B: RoHS Compliant.&& Product Description Supplier Techno Generic ASA Material Status Commercial: Active Availabilitys…
About Hostacom G3 R05 105555 is a 30% glass fiber reinforced PP homopolymer, with excellent stiffness, good dimensional stability and low creep under load at elevated temperatures. The product is available in black color, pellet form. This grade is delivered…
About EM-400 is LLDPE based adhesive resin containing anhydride. This grade shows strong adhesion to PE, aluminum, steel, and it has polyolefin-like properties. In addition, its processability is excellent. EM-400 is mainly intended for use as a adhesive resin in…
About TECHNYL® C 206F Natural is an unreinforced polyamide PA6, standard for fast injection cycles, for injection moulding. This grade has high fluidity and a good mould release.&& Product Description Supplier DOMO Generic PA6 Material Status Commercial: Active Features Good…
About Product Description Generic Polycarbonate Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 14.5 g/10min Density 1.194 g/cm³ MECHANICAL Nominal value Unit Test method tensile strength yield 59.5 MPa fracture 68.9 MPa Tensile…