About Product Description Supplier Asahi Kasei Generic PPO(PPE) Material Status Commercial: Active Features Good Dimensional Stability,Heat Resistance, Good Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.07 g/cm³ ASTM D792 Shrinkage rate 2.0 mm 0.8-1.0 %…
About PPO* 630 resin is a medium molecular weight polymer based on Polyphenylene Ether (PPE). PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers like Styrenic Block Copolymers. PPO*…
About Modified polyphenylene ether (PPE), high heat resistant, 20 % glass-fiber reinforced VESTORAN X7342 is the registered trademark of the Evonik Degussa GmbH for molding compounds containing poly-2,6-dimethyl-1,4-phenylene ether as polymeric constituent (poly-phenylene ether, PPE, also referred to as PPO).…
About TRIPPE® ST855 is a Polyphenylene Ether (PPE) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.&& Product Description Supplier Samyang Generic PPO(PPE) Material Status Commercial: Active Features V-1 Availabilitys North America,Asia Pacific,Europe Technical…
About HF185是一种非填充材料，具有阻燃性和流动性好等优点。 Product Description Supplier SABIC Generic PPO(PPE) Material Status Commercial: Active Features Good Dimensional Stability,Flame Characteristics,Good wear resistance,Heat Resistance, Good,Nontoxicity,Insulation Availabilitys Africa & Middle East Technical Data MECHANICAL Nominal value Unit Test method Taber wear and tear CS-17，1kg 100…
About Product Description Supplier Asahi Kasei Generic PPO(PPE) Material Status Commercial: Active Features Good Dimensional Stability,Heat Resistance, Good Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.07 g/cm³ ASTM D792 Shrinkage rate 2.0 mm 0.8-1.0 %…
About Product Description Supplier Asahi Kasei Generic PPO(PPE) Material Status Commercial: Active Features Good Dimensional Stability,Heat Resistance, Good Availabilitys Asia Pacific Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this…
About Product Description Generic PPO(PPE) Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method tensile strength 65 MPa ISO 527 elongation at break 12 % ISO 527 bending strength 105 MPa ISO 178 Bending modulus 2.5×103 MPa…
About PPO（PPE）粉料 Product Description Supplier Mitsubishi Generic PPO(PPE) Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method viscosity 0.47 ± 0.02 dl/g Volatiles ≤0.6 Wt/% Whiteness ≥95.0 % bulk density 0.6 ± 0.2 g/ml Notes…
About LNP* STAT-KON* ZE004 is a compound based on PPO resin containing 20% Carbon Fiber. Added feature of this grade includes: Electrically Conductive.&& Product Description Supplier SABIC Generic PPO(PPE) Material Status Commercial: Active Availabilitys Asia Pacific Process Methods Injection Molding…
About TECANYL®, due to its inherent chemical composition, exhibits unusually low moisture absorption. Therefore, good electrical insulating properties are realized over a wide range of humidity and temperature conditions. Chemical attack from water, most salt solutions, acids and bases is…
About NORYL PVX0800 resin is a high flow, V0 = 1.5 mm grade, suitable for a variety of electronics applications.&& Product Description Supplier SABIC Generic PPO(PPE) Material Status Commercial: Active Features High liquidity,V-0 Availabilitys North America Process Methods Injection Molding…
About NORYL™ SA120 resin NORYL SA120 resin is a low molecular weight polymer based on Polyphenylene ether (PPE). NORYL SA120 is intended for use as additive or building block in a variety of thermoplastics, thermoplastic elastomers like Styrenic Block…
About PPO（PPE）粉料 Product Description Supplier Mitsubishi Generic PPO(PPE) Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method viscosity 0.38 ± 0.02 dl/g Volatiles ≤0.6 Wt/% Whiteness ≥95.0 % bulk density 0.6 ± 0.2 g/ml Notes…
About NORYL GFN1720是一种20%的玻璃纤维增强的改性聚苯醚树脂，通过注射成型，这种改性聚苯醚树脂是旨在提供的热、 强度和电气性能的平衡。NORYL GFN1720有多种颜色可供选择，可用在点火线圈，线轴和其他电绝缘材料的优秀替代选择。 Product Description Supplier SABIC Generic PPO(PPE) Material Status Commercial: Active Features Glass fiber reinforced Availabilitys North America Technical Data MECHANICAL Nominal value Unit Test method Taber wear and tear CS-17，1kg 45 mg/1000cy Internal Method tensile…
About NORYL™ SA90 resin NORYL SA90 resin is a modified low molecular weight resin with increased hydroxyl functionality. It is designed specifically for use as a reactive component in epoxy and cyanate ester thermosets in electronic, coatings, adhesives, and…
About Product Description Supplier Bluestar Generic PPO(PPE) Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Intrinsic viscosity 35±2.50 cm³ /g ISO 1628/1 Copper Content ≤1.0 ppm Internal Method Volatile ≤0.60 % Internal Method Melt Index 300℃，10kg…
About Product Description Supplier Bluestar Generic PPO(PPE) Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Intrinsic viscosity 45±2.50 cm³ /g ISO 1628/1 Copper Content ≤1.0 ppm Internal Method Volatile ≤0.6 % Internal Method Melt Index 315℃，10kg…
About Product Description Supplier Bluestar Generic PPO(PPE) Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Intrinsic viscosity 50±2.50 cm3 /g ISO 1628/1 Copper Content ≤1.0 ppm Internal Method Volatile ≤0.60 % Internal Method Melt Index 315℃，10kg…
About Product Description Supplier Bluestar Generic PPO(PPE) Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Intrinsic viscosity 35±5 cm³/g molecular weight 22000-28000 Mx Density ＜10 ppm Volatility 0.6 % Melt Flow Rate 300℃, 10kg 21-35 g/10min…